Key Organizer recycling computer

An organizer of keys handy is the project that will take place today.
We are always looking for ways to give a second chance to any waste item that falls into our hands.
We take for TU also encourage you to "think green".
Well, besides the Key Organizer also do several keyrings with USB connections to attach them to the organizer. We have painted the organizer of keys to cover the brand. But if you eliminate this step, the process is really easy and fast.

Do not miss it, it is very practical and original.
For this craft will need the following

    A multiplier of USB ports that no longer serve.
    Different computer components that have USB connection and you no longer use. In our case we will use:
        A mouse.
        A scanner cable.
        A USB memory.
        And the cable itself port multiplier.
    Keychains hoops.
    A small cardboard template. Then you will see what is.
    Adhesive vinyl.
    Rule.
    Pen.
    Scissors.
    Pliers.
    Painting.
    Blank (optional).
    Double-sided adhesive tape.

The procedure is as follows

Step 1: How will hide the brand, use paint the same color as the body of the component, which is chromed.
Building on this, we motifs in relief.
Therefore, the first step is to prepare a template in adhesive vinyl to paint the reasons then be raised.
We will use small cardboard template we had prepared, and star-shaped die.
Cut and troquelamos vinyl. Once cut, paste it into your site, and protect the sides with a little masking tape.
And, once applied spray paint, remove immediately vinyl, and let dry.
One of advice before proceeding: before painting, paper or plastic protects the work surface.

Step 2: Once the paint is dry, give a second coat to cover the entire front of our Key Organizer and you get relief give the reasons we paint in the first step.
As we did before, we protect the sides with masking tape.
We paint, remove the masking tape immediately, and let dry.

Step 3: While the paint dries, we will make keychains.
We will use the USB connection as well as part of the cables.
We introduce the cable inside the ring for keychain, and do a multiple knot. This is the typical noose.
Watch how I do in the video. It's nothing complicated.
In future tutorials show you how to make your own bracelets nooses with leather cord.

Step 4: A USB memory, only what we will do is put some system to hook to the eye. We will use and recycle one correílla might belong to some old photo camera.

Step 5: Once the paint is dry, remove the cable. We could do this by opening the root component and cutting, but we will simplify the process. You only have to pull and start it. If quedase any other cable protruding, cut with pliers.

Step 6: Now we only have to install our recycling organizer keys at your location.
It is as simple as putting some double-sided tape and paste.
We will put you on the inside of the front door, at a safe height so that the kids do not reach.
That's it !! Look how easy and convenient it is to stop and take the keys to our Key Organizer.

Now we have our well organized and always on hand keys.

let's see image




 

Thanks ... hopefully useful :)